YXLON unipolar constant potential X-ray systems include 2.25 kW and 4.5 kW versions. The 2.25 kW X-ray systems have been designed and configured primarily for use in manual, semi-automated and fully automated radioscopic applications. The high energy and high dose rates of the unipolar 4.5 kW X-ray systems make them excellent candidates not only for radiographic and radioscopic applications but also for dosimetry and scanning methods like computertomography.
The typical application of each X-ray system is tailored towards specific target areas like low density applications, biological specimens (pathology), plastics and rubber compounds (MG103) and aluminum and steel applications like casting X-ray inspection (MG165 and MG226).
The unipolar 40kHz X-ray systems feature a very high output stability, a precise energy setting and an extremely fast change over to any selected new value. Any fluctuation or deviation of set values is controlled and corrected within microseconds. In addition these features reduce inspection times considerably and highly qualify the X-ray systems for inline inspection in fast, completely automated production lines.
The wide range of industrial inspection tasks calls for a universal, easy to use control unit for the X-ray system realized in the MGC41.
The set-up modes are menu driven. All signals, operating mode and fault diagnosis of internal or external errors are displayed in clear text which can be easily displayed in a number of optional languages. Additional error indications are given by numerical codes. Furthermore, 100 technique programs can be stored in the control unit for future use, and when connected through the serial port interface, an infinite number of programs may be stored on the host computer.
All components of the X-ray systems are protected from water damage. H.V Generators and Power supplies meet the requirements of IP54.
For more information on our unipolar stationary X-ray systems, please do not hesitate to contact us.
