Electronics manufacturing companies face the challenge of precise porosity evaluation inside their products. Peter Koch and Jeff Urbanski show new analysis methods working together for more accurate void measurement at critical interfaces.

High-resolution CT of a 3D-printed plastic impeller by the YXLON FF35 CT Metrology system provides clear insights into the inner structures and accurate results. What about the capabilities of YXLON UX20 with the new MesoFocus tube?

In this last blog, I like to show some results of a 3D printed part made of copper. Without being an expert in such manufacturing and testing applications, I can see how the quality check reveals more relevant information by higher resolution.

In this post we focus on the focal spot and bring high resolution to the details. High resolution in CT gets achieved by a very small focal spot, a higher magnification, and a well-aligned system with a very accurate rotation axis. Coming back to the question of the right kV-class.

In Spring of 2021, the long-awaited 450 kV MesoFocus tube came to Yxlon. We would like to give you first insights into the very convincing laboratory results and show you an idea of future possibilities with closed 450 kV sources.

The early determination of the quality of a motor using CT before further processing would save time, resources, material, and costs, an economic factor that should not be underestimated within the steadily increasing demand for electromobility.

Additive manufacturing (AM), also known as 3D printing, is the construction of a three-dimensional object from a CAD model or a digital 3D model. One of the most used AM methods for ceramics is Direct Ink Writing (DIW). Read about the challenges!

When we look for the optimal flat-panel detector, it’s not all about the highest possible resolution. Christian Jeuschede explains why we still stick to 139 µm respectively 150 µm pixel pitch instead of 100 µm and what to have in mind when chosing the best fit for your applications.
 

X-ray inspection for electronics has been around for decades, but that does not mean it has stayed the same. As the design and manufacturing for electronics shifts to smaller and more compact and dense products, X-ray technology has shifted as well. 

Standards and regulations rule the Aerospace industry. Inspections and reviews are crucial to passenger and flight safety, but compliance with these standards can become time consuming and expensive. Advances in technology put more pressure on the inspection process.

Industry 4.0, Internet of Things, Big Data, and Smart Factories are not only trendy buzzwords, the concept of machine to machine communication and integration is becoming vital to the advancement of many manufacturing industries.