Electronics manufacturing companies face the challenge of precise porosity evaluation inside their products. Peter Koch and Jeff Urbanski show new analysis methods working together for more accurate void measurement at critical interfaces.

High-resolution CT of a 3D-printed plastic impeller by the YXLON FF35 CT Metrology system provides clear insights into the inner structures and accurate results. What about the capabilities of YXLON UX20 with the new MesoFocus tube?

今回のブログでは、銅製の3Dプリント部品の結果を紹介したいと思います。このような製造やテストアプリケーションの専門家でなくても、品質チェックが、より高い解像度によって、より適切な情報を引き出すことが可能であるとご覧いただけます。

この記事では、焦点位置に着目し、細部まで高解像度を実現する方法を紹介します。CTの高解像度は、非常に小さな焦点位置、高倍率、そして非常に正確な回転軸を持つよく調整されたシステムによって実現できます。ここで、適正なKVクラスの問題に戻ります。

2021年春、待望の450kV MesoFocus管がエクスロンにやってきました。非常に迫力のある実験結果をお見せし、クローズド450kV線源による将来の可能性に繋がるアイデアを御覧ください。

The early determination of the quality of a motor using CT before further processing would save time, resources, material, and costs, an economic factor that should not be underestimated within the steadily increasing demand for electromobility.

Additive manufacturing (AM), also known as 3D printing, is the construction of a three-dimensional object from a CAD model or a digital 3D model. One of the most used AM methods for ceramics is Direct Ink Writing (DIW). Read about the challenges!

When we look for the optimal flat-panel detector, it’s not all about the highest possible resolution. Christian Jeuschede explains why we still stick to 139 µm respectively 150 µm pixel pitch instead of 100 µm and what to have in mind when chosing the best fit for your applications.
 

Kathy Scott, Service Sales Director at Yxlon/Comet Technologies USA knows that service matters. With her 29 years of experience, she knows service and support should rate nearly as high in the decision to purchase a non-destructive testing (NDT) inspection system as the system itself. 

One might think a measurement using the same calibrated tool would have the same accuracy regardless of the object being measured.  But metrology is more than that, as this whitepaper will show. “Uncertainty of measurement” can be influenced by the object being measured, as well as the specific measurement task. 

Microlaunchers are an alternative to conventional launch vehicles. Able to carry payloads of up to 350 kilograms, these midsized transport systems are designed to launch small satellites into space. Researchers at the Fraunhofer IWS and the TU in Dresden developed an additively manufactured rocket engine with an aerospike nozzle for microlaunchers. The scaled metal prototype is expected to consume 30 percent less fuel than conventional engines on the way to orbit.

The gold standard for 3D measurement equipment is the DIN EN ISO 10360 Geometrical Product Specification (GPS). It is designed to help compare different equipment and create a clear understanding of when a system is within the specification and when it is not.